The model ACP pressure-balanced cage type control valves are designed for heavy duty service. The valve plug employs a pressure balance function to control high differential pressure fluid with small actuator force. The ACP realizes seat leakage performance as single seat valve by seal ring structure. In addition, the ACP is equipped the cage plug with a scraper ring to prevent a malfunction caused by foreign object enter between the cage plug and the cage. The actuator is adopted and powerful diaphragm motor. The ACP is widely applicable for reliable control of high or low temperature, high differential pressure process lines where dynamic stability, dynamic stability, low noise, anti-cavitation/flashing are required. SPECIFICATIONS Body Type: Straight-through, cast globe valve Nominal size: 1-1/2’’,  2’’,  2-1/2’’, 3’’, 4’’, 5’’, 6’’, 8’’  Pressure rating:   • JIS 10K, 16K, 20K, 30K, 40K                             • ANSI Class 125, 150, 300, 600                                 • JPI Class 125, 150, 300, 600 End connection:   • Flanged end;                                 • Welded end; SW (1-1/2’’, 2’’), BW (2-1/2’’ to 8’’) For body/trim material combinations and operating temperature ranges, refer to Table 1. Bonnet: • Plain bonnet (-17 to 230°C) • Extension bonnet Type 1 (-45 to -17°C and 230 to 360°C) • Extension bonnet Type 2 Integral cast type (-100 to -45°C), Welded type (-196 to -100°C) Note) Take care not to exceed the operating temperature ranges specified for respective materials. Gland type: Bolted gland Packing / Grease • Grease not provided When V-shaped PTFE packing or PTFE yarn packing is used. www.valve-cn.com